High-precision diagnostic equipment, benchtop power sources, and solar converters designed for continuous operation.
Headquartered in Shenzhen, China, Shenzhen Myami Power Technology Co., Ltd. (MYAMI) is a technology-driven manufacturer and solution provider specializing in high-precision, industrial-grade power supplies and electrical test equipment. Designed for engineering rigor, MYAMI bridges the gap between complex electronic research, high-voltage component testing, and scalable industrial automation.
Every MYAMI system is engineered with strict multi-layer protection protocols (OVP, OCP, OTP, and short-circuit safeguards) and complies with international safety and quality standards, including CE, RoHS, and ISO9001. Integrated with standard industrial control protocols (RS485, RS232, and CAN communication), our equipment seamlessly connects to automated production lines and central PC control systems.
Today, MYAMI serves research institutions, automotive OEMs, aerospace contractors, and electronics manufacturers across North America, Europe, East Asia, and the Middle East. Whether you require a single benchtop lab power supply or a custom high-power aging system, MYAMI is your ultimate partner for precision power and uncompromised testing reliability.
Four core operational pillars engineered to support high-density industrial applications and mission-critical power networks.
Featuring multi-digit LED displays, ultra-low ripple, and rapid transient response, engineered for precision electronic R&D, semiconductor evaluation, and PCB debugging. Output stability is guaranteed under highly variable thermal environments.
Delivering high-current, high-voltage DC/AC regulated power supplies (ranging up to hundreds of volts and amperes) built for industrial motor drives, electroplating rectifiers, and heavy-duty component burn-in testing applications.
Providing specialized DC power units, battery simulators, and variable AC power sources engineered for Electric Vehicle (EV) On-Board Chargers (OBC), BMS evaluation, and solar inverter testing with high energy feedback efficiency.
Supplying complementary test bench solutions, including digital oscilloscopes, multimeters, function generators, LCR meters, and specialized AC voltage regulators for global laboratories, aerospace testing hubs, and technical training institutes.
MYAMI's operational footprint and performance benchmarks delivering raw efficiency to global buyers.
Exploring the convergence of intelligent rack topologies, Wide Bandgap (WBG) semiconductors, and software-defined power infrastructures.
In high-density data centers, modern server systems, and heavy-duty industrial automation racks, the requirements for Power Distribution Units (PDUs) have expanded dramatically. Traditional basic distribution methods are no longer sufficient to manage the thermal profiles and energy loads demanded by next-generation computing units, particularly in high-performance computing (HPC) and artificial intelligence (AI) training clusters. The modern PDU is shifting from a passive electrical copper busbar setup to an active, intelligent node within a unified, software-defined power network.
1. Transition to Smart, Multi-Protocol Communication Layers
To interface seamlessly with Data Center Infrastructure Management (DCIM) software and SCADA industrial setups, modern intelligent PDUs utilize embedded microprocessors. MYAMI is integrating industrial Ethernet, RS485 (Modbus-RTU), CAN bus, and SNMPv3 architectures. This ensures secure, real-time power metric streaming down to the individual receptacle level, allowing engineers to track power factor, current harmonics, and voltage sag transients instantly.
2. Wide Bandgap Semiconductor Integration (GaN & SiC)
As efficiency standards tighten globally (such as the 80 PLUS Titanium requirements and European Ecodesign requirements), active switches, solid-state circuit breakers, and metering modules within PDUs are adopting Gallium Nitride (GaN) and Silicon Carbide (SiC) semiconductors. These materials minimize internal thermal dissipation and footprint, allowing high-amperage PDUs (up to 63A three-phase configurations) to operate cooler, increasing lifecycle durability and mean time between failures (MTBF).
3. Predictive Load Balancing and AI Diagnostics
By utilizing real-time sensor loops, next-generation distribution architectures can identify irregular current waveforms that indicate server power supply fatigue before a terminal failure occurs. Dynamic phase balancing algorithms can visually alert network administrators to move loads across three-phase distribution lines, mitigating neutral line overheating and optimizing transformer load factors.
How MYAMI powers modern industries through comprehensive, high-capacity electrical setups.
Optimized for low-latency compute facilities. Our power distribution integration supports monitored and switched options to prevent cascade circuit breakers from tripping during cold start inrush currents. The integration of high-precision multimeters and transient wave loggers enables continuous facility monitoring.
From testing high-voltage traction batteries to debugging onboard chargers (OBC), MYAMI provides clean, high-power DC sources and dynamic load profiles. Integrating our programmable DC power supplies with PDU cabinets allows auto manufacturers to safely simulate sudden regenerative braking and grid drop-out conditions.
By leveraging MPPT solar charge controllers and pure sine wave off-grid hybrid inverters, we assist clean-energy operators in stabilizing local microgrids. Our distribution systems manage the dynamic balance between energy generation, storage in lithium arrays, and active factory consumption.
A deep dive into MYAMI’s quality-controlled production environment in Shenzhen, China.
As a premier global exporter, MYAMI leverages Shenzhen's unparalleled electronic component supply chain and advanced logistics infrastructure. Our production line operates under a strict lean manufacturing framework. Through the Integration of automated optical inspection (AOI), high-potential (Hi-pot) isolation testing, and digital oscilloscope calibration, we verify that every unit shipping out of our factory meets international parameters. Below is the visual representation of our manufacturing workflow, showcasing our state-of-the-art facilities.
Raw Material
PCB Checking
Assembling
Debug
Aging
Calibration
QC checking
Packing
Soldering Station
Electronic Screwdriver
PCB Check
Debug
QC check
Multimeter
Hi-pot Tester
Oscilloscope
LCR Meter
Digital power meter
Design
Multimeter
Hi-pot Tester
Oscilloscope
LCR Meter
Digital power meter
Evaluate performance characteristics across various power distribution configurations.
| PDU Configuration Class | Typical Voltage / Phase | Metering Resolution | Communication Protocol | Isolation Rating | Target Applications |
|---|---|---|---|---|---|
| Basic Distribution Unit | 110V/220V Single-Phase | N/A (Analog bypass) | None | 3.0 kVAC min | Legacy laboratory benches & basic utility integration |
| Metered Rack PDU | 220V/380V Split/Three-Phase | ±1.0% RMS accuracy | RS485 Modbus-RTU | 3.5 kVAC min | Server enclosures, medium industrial automated test stations |
| Intelligent Switched PDU | 230V/400V/480V Three-Phase | ±0.5% RMS accuracy | SNMP, CAN, Modbus-TCP | 4.0 kVAC min | Hyperscale data centers, remote microgrid infrastructure |
| High-Voltage DC (HVDC) | Up to 400VDC / 600VDC | ±0.2% precision sensing | CAN2.0B, RS485 | 5.0 kVAC min | EV Battery Test Chambers, motor drive burn-in systems |
Navigating regional electrical differences and quality assurance requirements for global enterprise buyers.
Global procurement teams must consider localized grid variations. North American installations require configurations capable of supporting 120V / 208V / 240V split-phase systems, whereas European, Middle Eastern, and Asian infrastructures rely heavily on three-phase 230V / 400V distribution topologies. MYAMI devices feature wide-input frequency ranges (47Hz to 63Hz) and robust EMI filters to counteract electromagnetic interference in heavy industrial environments.
Our internal testing limits harmonic distortion (THD) below 3.0% under peak resistive loads, preventing noise back-feeding into main distribution panels.
When sourcing power equipment from China, reliability is key. MYAMI ensures peace of mind by providing complete documentation packages, including electrical schematics, calibration certificates traceable to national metrology standards, and full component declarations for RoHS compliance.
Through our dedicated technical support channel, we provide global engineering consulting, assisting with layout calculations, cable sizing, and protective relay settings during facility integration.
Answers to complex electrical queries frequently encountered by layout engineers and procurement officers.
Explore our extended catalog of adjustable DC sources, solar regulators, and diagnostic oscilloscopes.
Myami Power