Explore our highly integrated, high-precision benchtop and cabinet variable frequency AC sources designed for engineering verification, aging tests, and laboratory compliance.
MYAMI 300V 5000VA 10KVA 30KVA 45KVA 20KVA 15KVA Industrial Cabinet High Current Variable Frequency Ac Power Supply Laboratory
MYAMI 350VA 500VA 1000VA Variable Frequency Programmable High Power Adjustable Single-phase Benchtop Stabilized AC Power Supply
MYAMI High Power Programmable AC Variable Frequency Power Supply 350VA 500VA 1000VA Adjustable Touch Screen & Digital Display
MYAMI 350VA 500VA 1000VA Variable Frequency Programmable High Power Stable Frequency High Precision Single-phase AC Power Supply
MYAMI 350VA 500VA 1000VA Adjustable Frequency High Voltage Benchtop Single Phase Programmable AC Power Supply Adjustable
MYAMI MY-70D30 3000VA 3KVA 45Hz 400Hz 0-300V Adjustable Single Phase Lab Variable Frequency Bench Programmable AC Power Supply
MYAMI MY-70D100 High Voltage Adjustable Laboratory Variable Frequency AC Power Supply 10KVA 45Hz 400Hz 0-300V with Touch Screen
MYAMI MY-70D50 5000VA 5KVA 45Hz 400Hz 0-300V Lab Touch Screen Programmable Variable Frequency High Voltage AC Power Supply
Insight into the growing global demand for variable-frequency and programmable AC regulation technologies.
As the global industrial sector undergoes digital transformation, electronic components, semiconductor devices, and automotive subsystems demand cleaner, highly regulated electrical inputs. The modern electrical grid is inherently unstable, subject to voltage sags, surges, harmonic distortion, and frequency fluctuations. Industrial programmable and variable frequency AC power supplies act as critical buffers and simulators, enabling research institutions, test labs, and factory automation lines to simulate exact global grid conditions (e.g., 110V/60Hz North American profiles, 230V/50Hz European setups, or 115V/400Hz aerospace requirements).
The explosive expansion of the Electric Vehicle (EV) industry has revolutionized testing protocols. On-board chargers (OBC), DC-to-DC converters, and charging stations must be rigorously validated against extreme anomalies. By deploying regenerative and non-regenerative AC sources, manufacturers can simulate voltage fluctuations, transient phase shifts, and sudden voltage dropouts to ensure vehicle systems comply with international electromagnetic compatibility (EMC) and functional safety regulations.
A deep dive into switching topology, control loops, and semiconductor innovations.
Linear AC power supplies offer unmatched low noise and ultra-fast transient responses, making them ideal for highly sensitive RF testing. However, switching topology (PWM regulation) has become the industrial standard due to superior efficiency (exceeding 85%), high power density, and reduced footprint for high-output systems.
The integration of Silicon Carbide (SiC) and Gallium Nitride (GaN) transistors represents the future of power design. These materials allow higher switching frequencies, lower thermal dissipation, and smaller magnetic components, driving cabinet sizes down while boosting output current capability.
Modern programmable AC sources rely on high-speed DSP architectures to execute complex DDS (Direct Digital Synthesis) waveform generation. This enables on-the-fly generation of harmonic distortions, arbitrary waveforms, and precise transient simulations via software.
Headquartered in Shenzhen, China, Shenzhen Myami Power Technology Co., Ltd. (MYAMI) is a technology-driven manufacturer and solution provider specializing in high-precision, industrial-grade power supplies and electrical test equipment. Designed for engineering rigor, MYAMI bridges the gap between complex electronic research, high-voltage component testing, and scalable industrial automation.
Every MYAMI system is engineered with strict multi-layer protection protocols (OVP, OCP, OTP, and short-circuit safeguards) and complies with international safety and quality standards, including CE, RoHS, and ISO9001. Integrated with standard industrial control protocols (RS485, RS232, and CAN communication), our equipment seamlessly connects to automated production lines and central PC control systems.
Today, MYAMI serves research institutions, automotive OEMs, aerospace contractors, and electronics manufacturers across North America, Europe, East Asia, and the Middle East. Whether you require a single benchtop lab power supply or a custom high-power aging system, MYAMI is your ultimate partner for precision power and uncompromised testing reliability.
Featuring multi-digit LED displays, ultra-low ripple, and rapid transient response, engineered for precision electronic R&D, semiconductor evaluation, and PCB debugging.
Delivering high-current, high-voltage DC/AC regulated power supplies built for industrial motor drives, electroplating rectifiers, and heavy-duty component burn-in testing.
Providing specialized DC power units, battery simulators, and variable AC power sources engineered for Electric Vehicle (EV) On-Board Chargers (OBC), BMS evaluation, and solar inverter testing.
Supplying complementary test bench solutions, including digital oscilloscopes, multimeters, and specialized AC voltage regulators for global laboratories and technical institutes.
E-E-A-T reliability is forged on the factory floor. Follow our rigorous, multi-stage production and validation process.
Precision electrical test equipment demands exact quality standards. At MYAMI, every system goes through detailed design validation, structural PCB evaluation, high-temperature aging chambers, and precise calibration before being securely packaged and dispatched globally.
Our facility utilizes calibrated multimeters, specialized LCR meters, digital power meters, high-pot isolation testers, and multi-channel oscilloscopes to verify every component is within standard parameters.
Raw Material
PCB Checking
Assembling
Debug
Aging
Calibration
QC checking
Packing
Soldering Station
Electronic Screwdriver
The technical foundation of our testing lab. We ensure zero field failures through modern test execution.
Equipped with sophisticated diagnosis interfaces and tools, our R&D team calibrates and confirms each variable AC source's performance. High current harmonics, quick voltage transition times, and stable frequencies are validated with advanced measuring instrumentation.
PCB Check
Debug
QC check
Multimeter
Hi-pot Tester
Oscilloscope
LCR Meter
Digital power meter
Design
Multimeter
Hi-pot Tester
Oscilloscope
LCR Meter
Digital power meter
How our variable frequency AC solutions resolve mission-critical verification hurdles globally.
Commercial and military aviation systems use 115V/400Hz frequency structures to save aircraft weight. Our programmable AC systems deliver high-purity, stable 400Hz outputs with low THD, ensuring navigation systems, gyroscopes, and cockpit electronics function correctly in flight simulations.
On-board chargers must withstand grid anomalies like voltage drops, frequency shifts, and phase failures. MYAMI programmable AC power sources simulate global grid voltages (single-phase and three-phase) to verify OBC efficiency, power factor correction, and safety responses.
Solar inverters and wind energy converters need to respond accurately to grid shifts. Our systems simulate standard and non-standard electrical behaviors, verifying the safety, anti-islanding protection, and low-voltage ride-through (LVRT) responses of modern micro-inverters.
Expert technical answers to common integration, selection, and compliance questions.
An AC Frequency Converter primarily converts input utility grid electricity to a target voltage/frequency (such as converting 50Hz to 60Hz) to operate imported machinery. An AC Power Source (particularly a programmable one) serves as high-precision laboratory test equipment, offering low harmonic distortion, precise transient response, variable voltage sweeps, and arbitrary waveform programming to test devices under grid anomalies.
Total Harmonic Distortion (THD) measures the purity of the output sine wave. Higher THD introduces unwanted electronic noise into the Unit Under Test (UUT), which can cause incorrect power measurements, thermal stress in inductive loads, or false product failures. MYAMI high-power AC power supplies maintain THD < 0.5%, ensuring test results are stable and accurate.
The crest factor is the ratio of peak current to RMS current. Rectified switching power supplies (found in most modern electronics) draw high-amplitude current pulses, resulting in crest factors of 3:1 or higher. If your power source is under-designed for these peaks, it may saturate, causing voltage distortion. Selecting an AC source with sufficient peak current capacity is vital for inductive or non-linear loads.
MYAMI programmable power supplies support integration protocols including RS232, RS485, and CAN. This allows the equipment to interface with automated factory lines, centralized LabVIEW software setups, PLC platforms, or data acquisition units for continuous quality monitoring.
Industrial-grade precision, variable phase capabilities, and multi-range frequency controls.
MYAMIi MY-70D20 2000VA Single-Phase Touch Screen Programmable Variable Frequency Lab AC Power Supply Industrial Power Supply
MYAMI MY-70D20 300V 2000VA 2KVA 45Hz 400Hz Single Phase Touch Screen Bench Programmable Variable Frequency AC Power Supply
For MYAMi High Density Variable Frequency AC Power Source 500VA 1KVA 2KVA 3KVA 5KVA 6KVA Programmable for Industry Use 45Hz 75Hz
MYAMI 300V 350VA Bench Single Phase Programmable Variable Frequency Ac Power Supply for Experimental test
MYAMI 300V 5KW 10KW 15KW 20KW 30KW 45KW Adjustable Frequency Laboratory Ac Power Supply for Electric Vehicle Experiment
MYAMI 300V 500VA Programmable Variable Frequency Conversion High Power Adjustable Bench Single Phase AC Power Supply
MYAMI 350VA 500VA 1000VA Adjustable Frequency High Voltage Bench Single Phase Programmable AC Power Supply
MYAMI 300V 500VA 1000VA Variable Frequency Laboratory Programmable Ac Power Supply for Aging test
Myami Power