Explore our state-of-the-art educational, research, and laboratory analog and digital oscilloscopes, calibrated to international precision metrics.
Headquartered in Shenzhen, China, Shenzhen Myami Power Technology Co., Ltd. (MYAMI) is a technology-driven manufacturer and solution provider specializing in high-precision, industrial-grade power supplies and electrical test equipment. Designed for engineering rigor, MYAMI bridges the gap between complex electronic research, high-voltage component testing, and scalable industrial automation.
We operate with the understanding that signal analysis and power regulation are the twins of microelectronic diagnosis. By integrating dynamic high-fidelity oscilloscope diagnostic mechanisms directly with multi-layered protective DC and AC power frameworks, MYAMI ensures global research facilities, engineering labs, and production pipelines function with zero-variance operational parameters.
Featuring multi-digit LED displays, ultra-low ripple, and rapid transient response, engineered for precision electronic R&D, semiconductor evaluation, and PCB debugging.
Delivering high-current, high-voltage DC/AC regulated power supplies built for industrial motor drives, electroplating rectifiers, and heavy-duty component burn-in testing.
Providing specialized DC power units, battery simulators, and variable AC power sources engineered for Electric Vehicle (EV) On-Board Chargers (OBC), BMS evaluation, and solar inverter testing.
A visual breakdown of our state-of-the-art manufacturing flow from raw materials sourcing to standard hardware burn-in and multi-layer digital calibration.
Raw Material
PCB Checking
Assembling
Debug
Aging
Calibration
QC checking
Packing
Soldering Station
Electronic Screwdriver
Every dynamic oscilloscope and analytical diagnostic unit from MYAMI undergoes multi-point testing utilizing industry-standard validation toolsets. This ensures that transient wave responses and analog inputs strictly match the reference datasheets.
PCB Check
Debug
QC check
Multimeter
Hi-pot Tester
Oscilloscope
LCR Meter
Digital power meter
Our Research and Development laboratory integrates advanced signal design systems, facilitating rapid iteration on analog front-ends, high-frequency ADCs, and digital signal processing (DSP) logic arrays.
Design
Multimeter
Hi-pot Tester
Oscilloscope
LCR Meter
Digital power meter
In modern electronics, high-speed signal integrity is of paramount concern. An oscilloscope is not merely a display; it is a complex analog-to-digital processing chain. Two core technical vectors determine its validity: Bandwidth and Real-Time Sampling Rate.
The analog bandwidth (e.g., 20MHz to 100MHz in standard MYAMI units) specifies the frequency limit at which an incoming sinusoidal signal is attenuated by -3dB. According to standard instrumentation design principles, to prevent severe amplitude attenuation and retain accurate signal shape, the oscilloscope bandwidth should be at least 5 times the frequency of the fastest digital clock in the circuit under test.
Simultaneously, the sampling rate, measured in Giga-samples per second (GSa/s), dictates the timing resolution. The Nyquist Shannon Theorem demands that the sample rate must be at least twice the highest frequency component of the signal. In practical factory verification setups, MYAMI instruments implement a 1 GSa/s sampling rate, providing a 10x oversampling factor for 100MHz signals. This eliminates aliasing phenomena and reconstructs transient edges down to nanosecond precision.
While Digital Storage Oscilloscopes (DSOs) dominate modern applications due to memory depth and mathematical analysis capacities, Analog Oscilloscopes continue to provide unmatched visual representation for education and raw signal validation.
Analog oscilloscopes plot waveforms by driving an electron beam directly across a CRT screen, reflecting changes in amplitude in real-time. This creates a natural "intensity gradation" based on signal occurrence frequency. In education, physics labs, and component development, analog models (such as our MYAMI 20MHz Dual-Channel Analog Oscilloscope) offer instantaneous signal reproduction without the quantization noise or processing blind-time associated with lower-end ADCs.
Procuring test and measurement assets for national scale educational institutions, industrial production lines, or consumer electronics factories demands thorough verification of factory qualifications and equipment stability. When auditing potential oscilloscope factories, engineering procurement officers must evaluate the following benchmarks:
Ensure the factory complies with ISO9001 and provides instruments that meet CE and RoHS directives. Pre-calibration certificates trace accuracy back to national physics standards.
Continuous burn-in/aging processes during manufacturing guarantee reliable daily performance. A certified factory test bench avoids premature ADC or power supply failures.
For production lines, oscilloscopes must offer remote control capabilities. Direct USB Communication, RS232, and CAN connectivity enable automated pass/fail testing scripts.
Every MYAMI system is engineered with strict multi-layer protection protocols (OVP, OCP, OTP, and short-circuit safeguards) and complies with international safety and quality standards, including CE, RoHS, and ISO9001. Integrated with standard industrial control protocols (RS485, RS232, and CAN communication), our equipment seamlessly connects to automated production lines and central PC control systems.
Today, MYAMI serves research institutions, automotive OEMs, aerospace contractors, and electronics manufacturers across North America, Europe, East Asia, and the Middle East. Whether you require a single benchtop lab power supply or a custom high-power aging system, MYAMI is your ultimate partner for precision power and uncompromised testing reliability.
With the global transition to high-voltage Electric Vehicles (EVs) and smart grids, diagnostic equipment must withstand harsh electromagnetic interference (EMI) environments. MYAMI integrates dynamic isolation barriers in its differential measurement architectures, permitting accurate measurement of transient switching patterns on silicon carbide (SiC) and gallium nitride (GaN) motor drives without grounding hazards.
Academic laboratories require durable, cost-effective equipment that can handle operator error. We provide dedicated educational analog models featuring simplified interfaces, robust dual-trace display modes, and built-in protection fuses to withstand incorrect probe grounding.
The next decade of test instrumentation demands the integration of artificial intelligence directly into the oscilloscope's logic hardware. MYAMI's technology roadmap features the inclusion of automated pattern-matching algorithms within FPGA chips, enabling real-time jitter, rise-time, and eye-diagram parameter generation directly on the edge. This significantly reduces testing overhead for telecom and automated manufacturing clients.
Expert technical advice regarding manufacturing parameters, selection metrics, and device calibration.
Our comprehensive portfolio of commercial grade oscilloscopes, delivering high sample rates and robust warranty periods.
Myami Power
