High-precision diagnostic and temperature logging devices engineered to meet LATU (Laboratorio Tecnológico del Uruguay) metrological standards.
Uruguay has emerged as a sophisticated economic corridor in South America, pivoting heavily toward high-tech logistics, biological pharmaceuticals, and eco-sustainable industrial projects. Under the guidance of LATU (Laboratorio Tecnológico del Uruguay), the nation enforces stringent metrology regulations on industrial processes, demanding traceably calibrated measurement systems.
Key sectors driving this instrument transition include the highly automated Pulp & Paper Mills (such as UPM and Montes del Plata), which require extensive thermodynamic profiling; the thriving Agro-industrial and Dairy sector demanding constant cold-chain thermal validation; and the expanding Renewable Energy Infrastructure, where wind farms and solar plants require electronic load testing and power analysis.
As direct exporters and manufacturers, MYAMI fills this technological niche. We provide specialized instruments that bridge the gap between high-precision benchtop R&D and rough, high-voltage field testing across the Montevideo Free Zones (Zonamerica, WTC Free Zone) and provincial industrial sectors.
Inquire About Custom Calibration Specs
Why leading global manufacturers trust Shenzhen-based engineering combined with local Uruguayan logistics support.
By leveraging Shenzhen's unparalleled electronic component ecosystem, MYAMI optimizes material procurement and quality testing, resulting in a 30-40% cost efficiency gain over European/North American alternatives, with zero compromises on component quality.
Every digital multimeter, electronic load tester, and multi-channel temperature logger undergoes a strict 72-hour high-temperature aging test and multi-point calibration traceable to global NIST/ISO/IEC 17025 standards before shipping to South America.
Unlike basic analog diagnostic equipment, MYAMI devices come standard with RS232, RS485, and CAN interface ports, allowing seamless Modbus integration into Uruguayan PLC systems and remote SCADA monitoring setups.
Headquartered in Shenzhen, China, Shenzhen Myami Power Technology Co., Ltd. (MYAMI) is a technology-driven manufacturer and solution provider specializing in high-precision, industrial-grade power supplies and electrical test equipment. Designed for engineering rigor, MYAMI bridges the gap between complex electronic research, high-voltage component testing, and scalable industrial automation.
Every MYAMI system is engineered with strict multi-layer protection protocols (OVP, OCP, OTP, and short-circuit safeguards) and complies with international safety and quality standards, including CE, RoHS, and ISO9001. Integrated with standard industrial control protocols (RS485, RS232, and CAN communication), our equipment seamlessly connects to automated production lines and central PC control systems.
Today, MYAMI serves research institutions, automotive OEMs, aerospace contractors, and electronics manufacturers across North America, Europe, East Asia, and the Middle East. Whether you require a single benchtop lab power supply or a custom high-power aging system, MYAMI is your ultimate partner for precision power and uncompromised testing reliability.
MYAMI's four core operational pillars built for complex R&D and demanding production environments.
Featuring multi-digit LED displays, ultra-low ripple, and rapid transient response, engineered for precision electronic R&D, semiconductor evaluation, and PCB debugging.
Delivering high-current, high-voltage DC/AC regulated power supplies (ranging up to hundreds of volts and amperes) built for industrial motor drives and heavy-duty component burn-in testing.
Providing specialized DC power units, battery simulators, and variable AC power sources engineered for Electric Vehicle (EV) On-Board Chargers (OBC), BMS evaluation, and solar inverter testing.
Supplying complementary test bench solutions, including digital oscilloscopes, multimeters, and specialized AC voltage regulators for global laboratories.
From raw components to final laboratory-certified calibration, our manufacturing chain adheres to ISO9001 protocols.
Raw Material
PCB Checking
Assembling
Debug
Aging
Calibration
QC checking
Packing
Soldering Station
Electronic Screwdriver
The precision instruments employed inside our R&D labs to secure compliance, signal integrity, and protection speed.
PCB Check
Debug
QC check
Multimeter
Hi-pot Tester
Oscilloscope
LCR Meter
Digital power meter
Design
How our laboratory instruments solve critical operational problems in Uruguay's unique sectors.
Exporting high-value meat, dairy, and pharmaceutical products through Montevideo Port requires strict temperature monitoring. Our multichannel temperature data recorders, holding up to 64 thermocouple channels (K, J, PT100), allow operators to audit pasteurization phases and verify thermal logistics configurations.
With UTE expanding renewable energy integration, testing sub-station battery backups and solar micro-inverters is essential. Our programmable DC electronic loads (up to 400W/500V) and battery analyzers simulate load dynamics, allowing engineers to benchmark storage efficiency and aging curves.
Montevideo's tax-free zones host state-of-the-art biological labs. Our WS30 handheld recorders provide real-time temperature log plots on high-contrast LCDs, allowing lab technicians to confirm incubation conditions while exporting audit data directly via USB.
Programmable electronic load analyzers, battery testers, and multichannel thermal loggers engineered for industrial automation integration.
Understanding the evolution of diagnostic instruments and how MYAMI products stay ahead of global standards.
Modern industrial plants have moved beyond handwritten temperature checks and analog pointer multimeters. Driven by compliance protocols like FDA 21 CFR Part 11 and ISO 9001, global industries now require Paperless Electronic Recording. Our multichannel temperature loggers provide encrypted internal flash storage and direct USB export capabilities, creating tamper-proof records for international audits.
Additionally, the rapid scaling of Electric Vehicle (EV) charging interfaces and localized battery backup systems requires smart load profiling. Legacy load banks operated purely on fixed resistors, generating vast amounts of unregulated heat. MYAMI's programmable DC loads feature high-precision constant current (CC), constant resistance (CR), constant voltage (CV), and constant power (CP) modes, allowing engineers to script specific dynamic discharge cycles that replicate actual operational loads.
As telemetry standards evolve, all MYAMI devices are engineered to support long-distance serial RS485 communication, allowing industrial facilities in Salto or Montevideo to monitor real-time testing queues remotely from centralized control towers.
Download Technical Whitepapers
Technical and logistics insights for procurement officers and laboratory directors in Uruguay.
Every MYAMI digital instrument and data recorder is supplied with an factory-level Calibration Certificate showing traceability to international metrology standards (ISO/IEC 17025). This ensures Uruguayan laboratory inspectors can verify calibration alignments when auditing facilities under local LATU metrology systems.
Our instruments support a broad range of standard industrial thermocouples, including K, J, E, T, N, S, R, and B types, alongside PT100 and PT1000 resistance temperature detectors (RTDs). This versatility allows laboratories to measure temperature profiles ranging from -200°C to 1800°C within the same unit.
We work closely with Uruguayan importing agencies and global freight forwarders (DHL, FedEx, UPS) to process customs clearance seamlessly. For larger high-power DC test sources, we provide detailed HS code declarations, certificates of origin, and safety standard compliance documentation to facilitate fast entry through the Port of Montevideo and Montevideo International Airport.
Yes. By utilizing the RS232/RS485 PC interface and our accompanying telemetry software, engineers can program complex test steps, set cutoff limits for voltage, capacity, and runtime, and export discharge curves directly to Excel. This is highly suitable for checking LiFePO4 battery banks used in renewable energy systems.
Myami Power